|
|
House with an establishment
Julínek, Dan ; Kalábová, Tereza (referee) ; Šuhajda, Karel (advisor)
The bachelor work contains design documents of a standalone family house with an establishment. This house is situated in the area of Brno-centre, region Brno in parcel no. 1428/1 in the land register of Kohoutovice. Built up area is 164,5 m2. The house is a twofloor,partial basement with an attic. On the ground floor of the living part of the house is designed entrance, vestibule, corridor, bathroom, WC, kitchen, pantry, cojoined dining room and living room, and staircase. In the operational part of the ground floor is designed entrance, waiting room, veterinary medicine, WC for the patients, WC for the working staff, conveniences, dressroom, and store room. In the attic there are situated two rooms, quest bedroom, master bedroom, bathroom, WC, dressroom, study, corridor, and loggia. In the basement there are situated workshop, laundry room, cleaning store room, corridor, and staircase. The building is based on foundation strips made from concrete C16/20, all peripheral frame structures in the basement are designed in BTB bricks, and the elevated frame sturcturesthe syare designes in system Porotherm. Staircase is made as monolithic construction with wood paneling. Roof is a gabled roof of the type „hambalek“ construction. Roof slope is 35° with ceramic tile of „Tondach Figaro 11“.
|
|
|
Apartment house
Pavlík, Marek ; Vorlíčková, Petra (referee) ; Donaťáková, Dagmar (advisor)
The theme of this bachelor thesis is realization of project documentation for new apartment building. The main aim is development of apartment building in Čejkovice, which will house four family with children. There are four maisonette flats, two of the have 5+KK disposition, garage and shared technical room. Two apartments are 4+KK, garage and shared technical room. The Building is designed as masoned with ceramic bricks HELUZ, based on the concrete strip foundation. Roof is designed as a roof truss made from collar beam system. Clay tile roofing Wienerberger is used as roof covering while the roof itself is pithched at 35°. The Ceiling above 1NP is designed as monolithic reinforced concrete slab 250mm thick. Staircase that leads to 2NP is designed as a wooden with wooden steps.
|
|
|
Thermal technical assessment of building structures
Paďouk, Jaroslav ; Janík, Zdeněk (referee) ; Kalousek, Miloš (advisor)
This theoretical diploma thesis deals with „nearly zero energy buildings“. The aim of the thesis is to evaluate building constructions based on their impact on thermal requirements fulfilment and apply results of the evaluation on a design of a nearly zero energy building. The thesis describes individual factors impacting energy consumption of a nearly zero house building, evaluates individual types of insulations systems for roof constructions, analyses window details, foundation details and connection of roof and external wall or the floor structure and external wall. The basic criteria for the evaluation is the fulfilment of the thermal requirements as well as the costs of the construction itself and energy consumption for the individual construction or detail. The specialized part of the thesis deals with design and comparison of 2 types of timber roof truss systems, the purlin roof and the collar roof. The suitability of the roof systems for nearly zero energy building is evaluated as well. The result of he thesis is the proposal of solutions for the nearly zero energy building. The proposal consists of layout solutions, design of suitable construction system, load-bearing system including drawings. The output is also Energy Performance Certificate.
|
|
|
Family house
Zukal, Zdeněk ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The bachelor work contains design documents of a standalone family house. This house is situated in the village Lipůvka, region Blansko in parcel no. 662/69 in the land register of Lipůvka. Built up area is 231,3 m2. Family house is two-stroyed, partial basement with an attic. On ground floor is designed entrance, vestibule, bathroom, WC, kitchen, pantry, dining room, tercce, living room, staircase, corridor, quest-room, garage, workshop, dressroom. In the attic are situated three rooms, bedroom, bathroom, WC, dressroom, loggia. In the basement are situated laundry room, boiler room, warehouse appliance. The building is based on foundation strips made from concrete C20/25, all frame structures are designed in the system Porotherm. Staircase is made as monolithic construction with wood paneling. The roof is gabled roof with type of „hambalek“ construction. Roof slope is 35° with ceramic tile of „Tondach Francouska 14“
|
|
|
Family house
Flídr, Tomáš ; Josef, Černý (referee) ; Hradil, Dušan (advisor)
In bachelor´s thesis is written up documentation of a family house. Family house is designed in the cadastral area of Záhraď in Litomyšl. A land is situated in the northeastern part of city in gentle gradient. House is designed as rectangle with dimensions 9,0 x 11,78 m and there is attached garage. House has two floors and gable roof. The supporting system of vertical and horizontical constructions is made by PoroTherm blocks, the truss is made by collar beam.
|
|
|
Apartment house
Pavlík, Marek ; Vorlíčková, Petra (referee) ; Donaťáková, Dagmar (advisor)
The theme of this bachelor thesis is realization of project documentation for new apartment building. The main aim is development of apartment building in Čejkovice, which will house four family with children. There are four maisonette flats, two of the have 5+KK disposition, garage and shared technical room. Two apartments are 4+KK, garage and shared technical room. The Building is designed as masoned with ceramic bricks HELUZ, based on the concrete strip foundation. Roof is designed as a roof truss made from collar beam system. Clay tile roofing Wienerberger is used as roof covering while the roof itself is pithched at 35°. The Ceiling above 1NP is designed as monolithic reinforced concrete slab 250mm thick. Staircase that leads to 2NP is designed as a wooden with wooden steps.
|
|
|
Thermal technical assessment of building structures
Paďouk, Jaroslav ; Janík, Zdeněk (referee) ; Kalousek, Miloš (advisor)
This theoretical diploma thesis deals with „nearly zero energy buildings“. The aim of the thesis is to evaluate building constructions based on their impact on thermal requirements fulfilment and apply results of the evaluation on a design of a nearly zero energy building. The thesis describes individual factors impacting energy consumption of a nearly zero house building, evaluates individual types of insulations systems for roof constructions, analyses window details, foundation details and connection of roof and external wall or the floor structure and external wall. The basic criteria for the evaluation is the fulfilment of the thermal requirements as well as the costs of the construction itself and energy consumption for the individual construction or detail. The specialized part of the thesis deals with design and comparison of 2 types of timber roof truss systems, the purlin roof and the collar roof. The suitability of the roof systems for nearly zero energy building is evaluated as well. The result of he thesis is the proposal of solutions for the nearly zero energy building. The proposal consists of layout solutions, design of suitable construction system, load-bearing system including drawings. The output is also Energy Performance Certificate.
|
|
|
Family house
Flídr, Tomáš ; Josef, Černý (referee) ; Hradil, Dušan (advisor)
In bachelor´s thesis is written up documentation of a family house. Family house is designed in the cadastral area of Záhraď in Litomyšl. A land is situated in the northeastern part of city in gentle gradient. House is designed as rectangle with dimensions 9,0 x 11,78 m and there is attached garage. House has two floors and gable roof. The supporting system of vertical and horizontical constructions is made by PoroTherm blocks, the truss is made by collar beam.
|
|
|
Family house
Zukal, Zdeněk ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The bachelor work contains design documents of a standalone family house. This house is situated in the village Lipůvka, region Blansko in parcel no. 662/69 in the land register of Lipůvka. Built up area is 231,3 m2. Family house is two-stroyed, partial basement with an attic. On ground floor is designed entrance, vestibule, bathroom, WC, kitchen, pantry, dining room, tercce, living room, staircase, corridor, quest-room, garage, workshop, dressroom. In the attic are situated three rooms, bedroom, bathroom, WC, dressroom, loggia. In the basement are situated laundry room, boiler room, warehouse appliance. The building is based on foundation strips made from concrete C20/25, all frame structures are designed in the system Porotherm. Staircase is made as monolithic construction with wood paneling. The roof is gabled roof with type of „hambalek“ construction. Roof slope is 35° with ceramic tile of „Tondach Francouska 14“
|
|
|
House with an establishment
Julínek, Dan ; Kalábová, Tereza (referee) ; Šuhajda, Karel (advisor)
The bachelor work contains design documents of a standalone family house with an establishment. This house is situated in the area of Brno-centre, region Brno in parcel no. 1428/1 in the land register of Kohoutovice. Built up area is 164,5 m2. The house is a twofloor,partial basement with an attic. On the ground floor of the living part of the house is designed entrance, vestibule, corridor, bathroom, WC, kitchen, pantry, cojoined dining room and living room, and staircase. In the operational part of the ground floor is designed entrance, waiting room, veterinary medicine, WC for the patients, WC for the working staff, conveniences, dressroom, and store room. In the attic there are situated two rooms, quest bedroom, master bedroom, bathroom, WC, dressroom, study, corridor, and loggia. In the basement there are situated workshop, laundry room, cleaning store room, corridor, and staircase. The building is based on foundation strips made from concrete C16/20, all peripheral frame structures in the basement are designed in BTB bricks, and the elevated frame sturcturesthe syare designes in system Porotherm. Staircase is made as monolithic construction with wood paneling. Roof is a gabled roof of the type „hambalek“ construction. Roof slope is 35° with ceramic tile of „Tondach Figaro 11“.
|
guest ::
